connection is accomplished from the hub uplink (MDI-II) port to
any of the Switch (MDI-X) ports.
A. 10BASE-T Hub
For a 10BASE-T hub, the Switch LED indicators should light up
as the following:
"10/100M FDX, 10/100M COL" LED indicator is OFF.
"100M LINK/ACT, 10LINK/ACT" LED indicator is light
amber.
B. 100BASE-TX Hub
For a 100BASE-TX hub, the Switch LED indicators should light
up as the following:
"10/100M FDX, 10/100M COL" LED indicator is OFF.
"100M LINK/ACT,10M LINK/ACT" LED indicator is light
green.
Hub without Uplink (MDI-II) port
If a hub is not equipped with an uplink (MDI-II) port, connection
can be made using either straight cable or crossover cable.
14