Setting The Date And Time - AMX VTX Instruction Manual

Figure 39
Set time and date page
VTX Video Teleconferencing System - Preliminary
Setup page buttons
Button
SHOW DEVICE
AXlink
BRIGHTNESS

Setting the date and time

To set the date and time:
1.
To set the date and time, press the SET TIME AND DATE button to open the
page shown in Figure 39.
2.
Set the year, month, day, hour, minute, clock display, and day/month display.
a.
Press the up and down buttons to set the year.
Function
Display all the AXlink devices communicating with the
AXB-EM232. The page lists the devices that respond to the
AXC-EM Enhanced Master card in the AXCESS Control
System. When all devices respond, a message appears on the
screen stating that all programmed and extra devices are
present.
EXIT Returns to the Setup page.
QUIZ Refreshes the list with a new device list.
MORE Shows additional pages if the list exceeds one page
The SERIAL NUMBER, AXlink, and vX.XX buttons shown are
non-active (display only) buttons. The SERIAL NUMBER button
shows the serial number AMX assigns to the touch panel. The
AXlink button is an AXCESS communication indicator that blinks
once every second when the AXCESS Control System is
connected to the touch panel. The vX.XX button shows the
current ROM software version installed in the touch panel.
Flip to the video setup page.
12:00
Advanced Configuration 37