American DJ Inno Color Beam LED User Instructions
Hide thumbs Also See for Inno Color Beam LED:

Advertisement

User Instructions
Rev. 6/12
Inno Color Beam LED
Unpacking:
Thank you for purchasing the Inno Color Beam LED by
American DJ
. Every Inno Color Beam LED has been thoroughly tested
®
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Do not return this unit to your dealer without first
contacting customer support.
Introduction:
The Inno Color Beam LED is part of American DJ's
continuing pursuit for creating high quality affordable intelligent fix-
tures. The Inno Color Beam LED is a high performance, DMX intel-
ligent, moving head LED fixture. This fixture is a great piece for retail
stores, displays, mood, architectural, interior and exterior decoration,
and clubs. This unit can be used as a stand alone, or in a Master/Slave
configuration. The unit can also be controlled via DMX controller.
Customer Support:
American DJ
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
.
®
PLEASE recycle the shipping carton when ever possible.
American DJ Supply
- www.americandj.com - Inno Color Beam LED User Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Inno Color Beam LED and is the answer not in the manual?

Questions and answers

Summary of Contents for American DJ Inno Color Beam LED

  • Page 1 The Inno Color Beam LED is part of American DJ’s continuing pursuit for creating high quality affordable intelligent fix- tures. The Inno Color Beam LED is a high performance, DMX intel- ligent, moving head LED fixture. This fixture is a great piece for retail stores, displays, mood, architectural, interior and exterior decoration, and clubs.
  • Page 2: General Instructions

    Warranty Registration • Power-supply cords should be routed so that they are not likely to The Inno Color Beam LED carries a 3 year (1095 days) limited war- be walked on or pinched by items placed upon or against them, ranty.
  • Page 3: Power Supply

    120 Ohm 1/4 W) between PIN 2 (DMX-) Figure 4 and PIN 3 (DMX +) of the last fixture. Inno Color Beam LED can be either a 1 Channel or 13 Channel DMX 5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR unit.
  • Page 4: Dmx Address

    1. Press the MENU button until “Dimmer Curve” is displayed, press ENTER. American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 7 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 8 ©...
  • Page 5 2. To activate the Tilt inversion press the UP or DOWN buttons American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 9 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 10 ©...
  • Page 6: Function Delay

    Use the UP or DOWN but- 1. Press the MENU button until “Auto Test” is displayed, press American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 11 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 12 ©...
  • Page 7: Fixture Time

    2. Either “YES” or “NO” will now be displayed. Press the UP or American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 13 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 14 ©...
  • Page 8: Master/Slave Configuration

    DMX-512 controller to control the chases and patterns, dimmer and strobe. A DMX controller allows you to create unique programs tailored to your individual needs. The Inno Color Beam LED has 2 DMX channel modes; a 1 Channel Mode & 13 Channel Mode.
  • Page 9 192 - 223 RANDOM STROBE SLOW - FAST 224 - 255 OPEN American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 17 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 18 © ®...
  • Page 10: Photometric Chart

    If problems are not resolved; Contact American DJ® for service. mix fixtures. 1-800-322-6337 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 19 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 20 ©...
  • Page 11: Warranty

    American DJ, Inc. concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product is damaged because not properly maintained as set forth in the instruction manual.
  • Page 12: Specifications

    American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service@adjgroup.eu / www.americandj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 American DJ Supply - www.americandj.com - Inno Color Beam LED User Manual Page 23 © ®...

Table of Contents