Do you have a question about the AMMF16R-1 and is the answer not in the manual?
Questions and answers
Summary of Contents for Aura Mist AMMF16R-1
Page 1
16” Outdoor Misting / Oscillating Fan Model Number: AMMF16R-1 Owner’s Manual READ AND SAVE THESE INSTRUCTIONS CAUTION: Before using this product, read this manual and follow all safety rules and operating instructions. Failure to comply with instructions could result in personal injury and/or property damage.
If safety information is not followed, someone will be seriously injured or killed. WARNING: If safety information is not followed, someone could be seriously injured or killed. CAUTION: If safety information is not followed someone may be injured. AMMF16R-1 Rev. 06/11...
Turn off the misting fan before unplugging. 18. Do not operate the misting fan with a damaged power cord, plug, or if the misting fan is damaged in any manner. Call an authorized service center for evaluation, adjustment or repair. AMMF16R-1 Rev. 06/11...
Page 4
27. Do not hang or mount misting fan on a wall or ceiling. 28. Do not operate without misting fan guards properly in place. CAUTION: DO NOT USE IN A WINDOW. FAILURE TO DO SO COULD RESULT IN THE PRODUCT COMING APART DURING OPERATION AND/OR PERSONAL INJURY. AMMF16R-1 Rev. 06/11...
Page 5
3. Rear fan guard nut (screw on motor housing) 4. Fan blade 5. Fan blade nut (screw on motor axis) 6. Power base assembly 7. Fan head assembly 8. Fan pole assembly 9. Fan pole screw 10. Screws (3) AMMF16R-1 Rev. 06/11...
Page 6
13.Connect the air tube and water tube to the connectors on the misting fan pole assembly by pushing the tubes all the way into the corresponding connectors (fig.13). (Note, small diameter tube = Water and large diameter tube = Air) AMMF16R-1 Rev. 06/11...
Page 7
Make sure your water pressure is lower than 100 PSI. 40 to 80 PSI water pressure will ensure optimal functionality of the system throughout maintenance intervals. The misting fan and/or misting system may start up when the unit is initially plugged to the power outlet. DO NOT USE THE MISTING FEATURES INDOORS. AMMF16R-1 Rev. 06/11...
Page 8
2. To prevent the accumulation of mineral deposits, let the pump run for 2 minutes after closing the ball valve so the air pump can clear the remaining water from the nozzles. 3. Turn the pump switch to the OFF position when complete (fig.9). AMMF16R-1 Rev. 06/11...
Page 9
Semi annual replacement of both the air and water filters ensures the life of your system. Remove the filter cover and locate the air and water filters (fig.1). The filters are connected to the system via “Push-In” connectors for ease of service AMMF16R-1 Rev. 06/11...
5. Order and replace nozzle Mist is not balanced on 1. Low water flow 1. Adjust the water flow control valve three nozzle 2. Water hose leaks 2. Turn off mist fan motor, and feel any air leaks on hoses AMMF16R-1 Rev. 06/11...
You should record both the model number and the date of purchase and keep in a safe place for future reference. MODEL NUMBER: XXXXX MFG DATE CODE: XXXX DATE OF PURCHASE: XX-XX-XX CUSTOMER SERVICE NUMBER: 1-800-320-6478 Website: www.auramist.net AMMF16R-1 Rev. 06/11...
Need help?
Do you have a question about the AMMF16R-1 and is the answer not in the manual?
Questions and answers