Download Print this page

Omega Vehicle Security RS-110-DP Operation Manual

Advertisement

Quick Links

L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
P. O. Box 508
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
30133
07/08 MO-RS-110-DP REV0
Omega
RS-110-DP
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.

Advertisement

loading

Summary of Contents for Omega Vehicle Security RS-110-DP

  • Page 1 Such modifications could void the user’s authority to operate the equipment. Omega Research and Development, Inc. P. O. Box 508 Douglasville, Georgia 30133 www.caralarm.com COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC. 07/08 MO-RS-110-DP REV0...
  • Page 2: Complete Programmable Features Matrix

    Complete Programmable Features Matrix ......11 Limited Lifetime Warranty ..........Back Cover - IMPORTANT - The RS-110-DP has many programmable features which can offer more operations than those described in the basic system instruc- tions. Mostly, these extra features and operations are configured at the time of installation.
  • Page 3: Remote Starting

    Run 3 Minutes Valet Switch is also used when programming system features and to utilize This feature when turned on configures the RS-110-DP to automatically keep the other remote start functions. See “Using the Valet Switch” on page 4. The engine running briefly after it is turned off.
  • Page 4: Using The Valet Switch

    • The first setting operates as a secondary START output. This will have the same brake. When the brake pedal is released, the RS-110-DP will keep the pulse timing as the large Violet wire on the main harness. engine running for the selected time, and then automatically turn it off.
  • Page 5: The Status Light

    Data Tach 10) 4 Flashes = Received transmitter command to stop. This feature selects the RS-110-DP processor’s method of determining the status of 11) 5 Flashes = Gear selector removed from “park”. the engine running during remote start operation. As explained in feature 5’s 12) 6 FLashes = Low voltage.
  • Page 6: Programming Features

    Programming Features Step 7 Allow 10 seconds to pass without performing any programming actions, or turn the vehicle’s ignition on. Step 1 Turn the vehicles’s ignition on. • The Status Light & parking lights will turn off. Step 2 Turn the ignition off. - SEE PAGE 6 FOR PROGRAMMING INSTRUCTIONS - Step 3 Within 5 seconds, Press &...