Description Of Parameters - Agilent Technologies E2094S User Manual

3
Programming with VISA
34
Table 6 The Format of the rsrcName (VISA Address) for Different
Interface Types
Interface Typical Syntax
ASRL ASRL[board][::INSTR]
GPIB GPIB[board]::primary address[::secondary address][::INSTR]
GPIB GPIB[board]::INTFC
GPIB-VXI GPIB-VXI[board]::VXI logical address[::INSTR]
GPIB-VXI GPIB-VXI[board]::MEMACC
GPIB-VXI GPIB-VXI[board][::VXI logical address]::BACKPLANE
TCPIP TCPIP[board]::host address[::LAN device name]::INSTR
TCPIP TCPIP[board]::host address::port::SOCKET
USB USB[board]::manufacturer ID::model code::serial
number[::USB interface number][::INSTR]
VXI VXI[board]::VXI logical address[::INSTR]
VXI VXI[board]::MEMACC
VXI VXI[board][::VXI logical address]::BACKPLANE
The following table describes the parameters used above.
Table 7

Description of Parameters

Parameter Description
board
host address
LAN device name
This optional parameter is used if you have more
than one interface of the same type. The default
value for board is 0.
The IP address (in dotted decimal notation) or the
name of the host computer/gateway.
The assigned name for a LAN device. Device
Name depends on LAN Host Device (see
documentaiton that came with your LAN Host
device such as E5810A). The default is inst().
Agilent VISA User's Guide