Table of Contents
Advertisement
AgfaPhoto OPTIMA 103
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing
information on your memory card. You can select the images to be printed and how many prints to
make with the DPOF menu in the camera and insert the memory card to the card compatible printer.
When the printer starts printing, it will read the embedded information on the memory card and print
the specified images.
To set DPOF:
1. Press the MENU button to launch the Playback menu.
2. Select DPOF. The submenu appears. Available
settings are as follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default
settings.
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the
select an image to mark for printing.
3. Specify the number of copies. Use the
increase/decrease number.
4. Press the FUNC button to toggle between turning on/
off the date stamp.
5. Press the SET button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation
message appears.
2. Select Yes.
3. Press the SET button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set Radial blur for an image:
1. Use the
or
blurs. The adjusting result on preview
synchronously while selecting the level.
2. Press the SET button to proceed save options.
3. Available settings are as follow:
•
Overwrite. Save and replace the old file
with a new one.
•
Save As. Save the new file as a new one.
•
Cancel. Cancel Radial blur.
or
keys to scroll and
or
keys to specify the level of
52
to
Advertisement
Table of Contents
