Declaration Of Conformity - AgfaPhoto OPTIMA 102 User Manual

Any changes or modifications not expressly approved by the party responsible for compliance could
void the user' s authority to operate the equipment. When shielded interface cables have been
provided with the product or when specified additional components or accessories have elsewhere
been designated to be used with the installation of the product, they must be used in order to
ensure compliance with FCC regulations.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and to pre-
vent interference to radio and television reception. Use only shielded cable to connect I/O devices
to this equipment. Any changes or modifications not expressly approved by the manufacturer
may void your warranty and service agreement.

Declaration of Conformity

We herewith confirm the following designated product: AgfaPhoto digital camera OPTIMA 102 has
been tested and found to comply with the requirements set up in the council directive on the
approximation of the law of members' states relating to the EMC Directive. For the evaluation
regarding to the electromagnet compatibility, the following standards were applied:
EN 55022: 2006 + A1: 2007 Class B
EN 55024: 1998+A1: 2001+A2: 2003
EN 61000-3-2: 2006
EN 61000-3-3: 1995 + A1: 2001 + A2: 2005
IEC 61000-4-2: Edition 1.2: 2001-04
IEC 61000-4-3 Edition 3.0: 2006
The device is marked with CE logo.
IEC 61000-4-4 2004
IEC 61000-4-5 Edition 2.0: 2005
IEC 61000-4-6: Edition 2.2: 2006
IEC 61000-4-8 Edition 1.1: 2001-03
IEC 61000-4-11 Second Edition: 2004
AS/NZS CISPR 22:2006
90