Nokia Image Viewer SU-2 User Manual page 7

2. Press the release buttons on both sides of the Nokia Image Viewer to
lift the cover up (Figure 3).
Check that the NTSC/PAL switch is in the correct position and that it
corresponds to the TV standard used in your country.
3. Connect the lead from the charger to the socket at the back of the
Nokia Image Viewer (Figure 4) and connect the charger to an AC wall
socket.
When connected to a charger, the Nokia Image Viewer does not use
or recharge the batteries.
When using batteries as a power source, the Nokia Image Viewer
automatically enters sleep mode after a while, if it is switched on,
but not connected to a Bluetooth device.
Figure 3
Figure 4
G e t t i n g s t a r t e d
7