Table of Contents
Advertisement
Installation in New
Construction
Insulating the Ceiling Cavity
If feasible, fill the ceiling cavity with insu-
lation at this point.
Mounting the
New Construction Bracket
The hole saving bracket enables a faster
and cleaner final installation of the speak-
er. It forces the drywall installer to cut out
the speaker hole for you and provides
wire ties for the speaker wire, reducing the
risks of accidental loss or movement of the
wire. In addition, it enables you to align
your speakers with other ceiling fixtures
with great accuracy since you can really
see exactly where the speaker will be.
To install the bracket, first attach the
QuickSnap
the bracket by snapping them into the
sides of the bracket. The wings can be
shortened by breaking them along the
scored lines if the length will interfere with
corner or eaves.
Figure 12
The optional hole saving brackets are installed
and the speaker wire is attached to the bracket.
13
™
new construction wings to
The wings and brackets have centering
lines to simplify placement of the speakers.
Screw one side of the assembled bracket
with wings to the joist using one of the
supplied screws. Level the bracket. Screw
the other side of the bracket/wing assem-
bly to the joist. Two screws on each side
make for a very secure installation. Secure
the wire to the bracket using bracket's
wire tie. The drywall installers will cut the
drywall to the exact size of the bracket.
(See Figure 12)
Concealing Speaker Wire for a
Future Installation
Attach the speaker wire in a loop between
the ceiling joists and carefully mark the
exact location of the wire on a set of
plans. Ask the general contractor to inform
the drywall installers that the speaker wire
loops are concealed for future installa-
tions. (See Figure13)
Figure 13
The speaker wire is looped and hung on two
nails attached to the joists securing it for future
use. Make sure the location is noted on house
plans.
Advertisement
Table of Contents
