Nikon LS-30 User Manual page 31

Inserting the SA-20 S
A
DAPTER
A plastic tray is provided with the strip-film adapter to catch film
ejected from the scanner. This tray is attached to the adapter as
shown below.
2. Pull forward to latch
Cautions
•
•
Nikon
LS-30 35 mm Film Scanner User's Guide
F
TRIP ILM
Wait until the status LED glows steadily or the scanner is off
before inserting or removing adapters. Do not replace adapters
while the scanner is operating.
If an adapter does not slide in smoothly, remove it from the
adapter slot and try again. Do not use force.
4. Scanning
1. Insert hooks
23