Page 1
Operational Instructions Only - No Parts List Operating instructiOns Model # and Owner’s Manual MHGLLP B MHGLLP G read instructiOns careFullY: Read all information and instructions, including gaslamp Warning Tag attached to light, before installation or use. Retain this guide for future reference.
LP devices. If your gaslamp appears to be malfunctioning, turn it to the “OFF” position and immediately contact your retailer or Mr. Heater. warning: Test all gas piping and connections for leaks after installing or servicing. Correct all leaks at once.
” copper tubing is used, a ” Flare Male Connector x assembly so that the slots in the bottom of valve cover engage NPT Straight Fitting is required. Mr. Heater #20347 Lock Screws (Ref. #12). (included). 7. Tighten valve cover lock screws.
Provide unobstructed flow of combustion and ventilation air. Step 3 • Use propane gas only for models MHGLLP B and MHGLLP G. Propane gas must be to this rating: 2500 to 2530 B.T.U. per When gaslamp is burning cubic foot.
2. Pull a clean, dry cloth through BBV to clean out foreign proper gas flow. Replace orifice if in question. material. Both MHGLLP B and MHGLLP G are ready to use with 3. Replace seal. Reassemble burner head and tighten securely. PROPANE ONLY, at altitudes under 4,500 ft. The following 4.
Page 6
Mr. Heater | MHGLLP B MHGLLP G Operating Instructions and Owner’s Manual...
Page 7
Blank Mr. Heater | MHGLLP B MHGLLP G Operating Instructions and Owner’s Manual...
LOCAL DEALER OR DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALI- FIED SERVICE AGENCY. parts Ordering inFOrMatiOn: purcHasing: Accessories may be purchased at any Mr. Heater local dealer or direct from the factory FOr inFOrMatiOn regarding serVice Please call Toll-Free 800-251-0001 www.mrheater.com...
Need help?
Do you have a question about the MHGLLP B and is the answer not in the manual?
Questions and answers