Logging On; Specific Device Requirements; Browser Requirements - ADDER .NET User Manual

Specific device requirements

Due to the close working relationship between ADDER.NET and the devices
that it controls, the various Adder KVM-over-IP devices must adhere to certain
minimum specifications for their firmware revisions:
Device Minimum firmware revision
AdderLink IP
AdderLink IP Gold
AdderLink iPEPS
AdderView CATx IP
AdderView CATxIP 1000
AdderView CATxIP 5000
WTI - VMR and MPC series
IMPORTANT
To ensure correct operation of ADDER.NET, no device is permitted to use the
'Force VNC Protocol 3.3' option. This is because ADDER.NET uses the advanced
security features available in VNC protocol 4, and for this reason VNC Protocol
version 3.3 is not supported.

Browser requirements

It is recommended that you use the later versions of the most popular browser
applications. For best results please use the versions listed below:
Browser
Chrome
Firefox
Internet Explorer
Opera
Safari
v3.0
v1.0
v1.0
v2.1
Any
Any
Any
Minimum version
v5 or later
v3.1 or later
v7 or later
v10 or later
v5 or later

Logging on

The ADDER.NET server uses standard HTML to produce a user interface that can
be viewed with any web browser. Before proceeding to log on to ADDER.NET,
please ensure that JavaScript is enabled in your browser.
To log on to ADDER.NET
1 Open your web browser and use the link that you specified during the
installation, e.g. host1, host1.yourcompany.local, 192.168.1.22, http://
localhost, etc.
ADDER.NET will display the logon page:
2 [When accessing for the first time since installation]
Enter a valid user name and password and then click the Logon button.
Note: The default administrator user name is admin and the default
password is adder. Ensure that these are changed as a first step once
ADDER.NET is running.
The first time that you log-on as a Manager user you will be presented
with the 'User Manager' page and be prompted to change the admin user
password. Once this is done, future logons will begin with the Start Page
that has been defined for each user. The defaults are: the 'Alert Browser' for
the admin user and the 'How To...' page for newly created users.
5