Airways Indicator - Miele T 8432 C Operating Instructions Manual

Programmable functions

Airways indicator

Fluff should be removed after drying.
The Airways indicator will remind you
to clean the filters when a certain
amount of fluff has collected in the
filters. You can decide at what level
of fluff this reminder should be given.
You will have an idea of which of the
four options to select after a few drying
programmes.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up constantly . . .
C . . . and then release the Start/Stop
button.
50
D Press the Buzzer button four times.
– The Buzzer indicator light will flash
on and off slowly once.
– P and 2 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 the Airways indicator light is
deactivated
I the Airways indicator light will
come on when there is a heavy
build-up of fluff
(The Drying indicator light will also
flash once).
2 Default setting
(the Drying indicator light will also
flash twice).
3 the Airways indicator light will
come on when there is only a light
build-up of fluff
(The Drying indicator light will also
flash three times).
E Pressing the Start/Stop button
switches from one to the other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.