Table of Contents
Advertisement
^ Remove cover g, and unscrew hinge
bracket h.
^ Fit hinge pin i in the second hole of
hinge bracket h.
^ Refit bracket j and cover k turned
through 180° on the opposite side.
^ Screw hinge bracket h into the
opposite side.
The M4 screw has to be screwed into
the left hole of the hinge bracket.
^ Turn cover g through 180°, and fit it
on the other side.
^ Exchange cover l in the middle of
the appliance with hinge bracket m.
To do this:
Unscrew cover l and hinge bracket
m, turn them around and screw in on
the opposite side.
^ Pull bearing bush n downwards out
of hinge bracket m and refit it from
above into the hinge bracket.
^ Remove the plugs from the door
bearing bushes in the top of the
doors and refit on the opposite side.
Changing the door hinging
^ Hang the upper appliance door on
hinge pin i and close the appliance
door.
^ Push middle hinge pin e from below
through hinge bracket m into the
upper appliance door.
^ Check that the upper door is
correctly aligned. If necessary, align
it using the long slots in hinge
bracket m.
^ Hang the lower door on hinge pin e
and then close the appliance door.
^ Fit lower hinge bracket b in the door
bearing bush of the lower door. Then
screw it securely to the housing.
^ Refit cover a.
47
Hide quick links:
Advertisement
Table of Contents
