Table of Contents
Advertisement
Changing the door hinging
^ Open the upper door, and pull it
downwards and off.
^ Remove cover h, and unscrew hinge
bracket i.
^ Fit hinge pin j in the second hole of
hinge bracket i.
^ Refit bracket k and cover l turned
through 180° on the opposite side.
^ Screw hinge bracket i into the
opposite side.
The M4 screw has to be screwed into
the left hole of the hinge bracket.
^ Turn cover h through 180°, and fit it
on the other side.
^ Exchange cover m in the middle of
the appliance with hinge bracket n.
To do this:
Unscrew cover m and hinge bracket
n, turn them around and screw in on
the opposite side.
46
^ Pull bearing bush o downwards out
of hinge bracket n and refit it from
above into the hinge bracket.
^ Remove spacer p with a screwdriver
and refit it on the opposite side.
^ Remove plugs q from the door
bearing bushes in the doors and refit
on the opposite side.
^ Hang the upper door on hinge pin j
and then close the appliance door.
^ Push middle hinge pin f from below
through hinge bracket n into the
upper appliance door.
^ Check that the upper door is
correctly aligned. If necessary, align
it using the long slots in hinge
bracket n.
^ Hang the lower door in hinge bracket
n then close the appliance door.
Hide quick links:
Advertisement
Table of Contents
