Miele KFN 12823 SD Operating And Installation Manual page 41

To remove the doors:
Make sure the door shelves are
empty.
^ Close the upper door.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
^ Remove cover b by pulling it
upwards.
Caution. The upper door is not
secure as soon as the upper hinge
plate is removed.
^ Loosen screws d in upper hinge
plate c and pull it upwards and off.
^ Carefully lift the upper door off and
place it to one side.
^ Carefully loosen cover e from above
using a screwdriver and then take it
off together with retaining plate f.
^ Then separate retaining plate f from
cover e, by pushing it slightly to the
left. Then pull the cover forwards and
off.
^ Rotate retaining plate f by 180°.
Changing the door hinging
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^ Remove cover g, then rotate it by
180° and fit it on the opposite side.
^ Then fit cover e together with
retaining plate f on the opposite
side.
41