Table of Contents
Advertisement
Changing the door hinging
^ Unscrew part h from hinge plate f,
rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.
^ Refit cover b on the opposite side.
^ With the help of another person,
carefully tip the appliance back and
refit hinge pin c into hinge plate f.
The notch at the bottom of the hinge
plate should face forwards.
^ Replace hinge bush d on hinge pin
c.
^ Refit cover a.
^ Place the door onto hinge pin c from
above.
^ Close the door.
^ Fit hinge plate c onto the opposite
side and secure it with screws d.
If necessary drill a pilot hole for the
screws.
^ Fit covers a and b to their opposite
sides.
^ Align the door with the appliance
housing using the outer long slots in
the lower hinge plate. Then tighten
the screws.
48
Replacing the soft-close door
mechanism
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
Advertisement
Table of Contents
