Page 3
Limited 1-Year Hardware Warranty Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from defects in material and workmanship for a period of one (1) years from the date of purchase. If the product should become defective within the warranty period, Adaptec, at its option, will repair or replace the product, or refund the purchaser’s purchase price...
Page 4
LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND. In return for acquiring a license to use the Adaptec software, which may include software from third party licensors and patches made available by Adaptec (“Software”), and the related documentation, you agree to the following terms and conditions: License.
Page 5
The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of this warranty, shall be: The replacement of any media not meeting the above limited warranty which is returned to Adaptec;...
Page 6
Agreement. No additional or any different terms will be enforceable against Adaptec unless Adaptec gives its express consent, including an express waiver of the terms of this Agreement, in writing signed by an officer of Adaptec. You assume full responsibility for the use of the Software and agree to use the Software legally and responsibly.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Adaptec, Inc. AUA-7500A Tested to Comply With FCC Standards...
Page 8
This is Your Adaptec Media Reader Installing the Device Drivers Installing Your Adaptec Media Reader Inserting and Removing Memory Cards Your Adaptec AUA-7500A Media Reader allows you to read and write to ® many different types of memory cards including Memory Sticks CompactFlash...
• Mounting screws • Installation CD, including device drivers, and documentation • Quick Install Guide System Requirements To use your Adaptec Media Reader, you need a PC-compatible computer with: ® ® • Microsoft Windows XP, Windows 2000, Windows Me, and Windows 98SE •...
Memory Stick Duo and Memory Stick Pro Duo Memory Stick MagicGate and Memory Stick ROM SmartMedia (SM) card T-Flash (need adapter) Note: These types of cards use the same slot on the Adaptec AUA-7500A Media Reader and therefore cannot be used simultaneously: CompactFlash card and Microdrive...
This is Your Adaptec Media Reader Your Adaptec AUA-7500A Media Reader has these features: Secure Digital / Mini-SD / MultiMedia Card / T-Flash (with adapter) / RS-MMC CompactFlash / Microdrive Screws Mounting Holes SmartMedia Memory Stick / Memory Stick Duo...
Windows Me & Windows XP Driver Installation Driver installation is optional for Windows Me, and Windows XP. Simply connect the Adaptec Media Reader to the system and the system will go through a sequence of installation processes by itself. When it is ready, you can access the reader by clicking the “Removable Disk”...
Page 13
3 Select your preferred language for the setup and click “Next”. 4 Click “Next” in the next screen.
Page 14
5 Make sure both boxes are checked then click “Next”. 6 When the installation is complete, select “Yes, I want to restart my computer now”, and then click “Finish”. Now you are ready to install your Adaptec Media Reader hardware which will be explained in the next section.
Installing Your Adaptec Media Reader If you want to mount the Adaptec Media Reader in one of the available 3.5” “Mounting Your AUA-7500A for drive bays, please follow the instructions in Internal Use” below; otherwise, you can advance to page 10 “Connecting...
Page 16
When your computer restarts, the system will go through a sequence of installation processes by itself. When installation is complete, you can begin using your Adaptec Media Reader. See “Inserting and Removing Memory Cards” on page...
Page 17
Connecting Your AUA-7500A for External Use When the system is up and running, you can simply plug your Adaptec Media Reader to any available USB port either on your motherboard or from an add-on card (PCI or PCMCIA). Note: Adaptec Media Reader is an USB 2.0 device that is compatible to USB 1.1 and USB 1.0.
Inserting and Removing Memory Cards The Adaptec Media Reader is equipped with four multi-format slots. The Figure below illustrates how to align your memory cards when inserting them into the card reader. SD / MMC / T-Flash (with adapter) / RS-MMC...
Page 19
To remove a memory card: 1 Ensure that no files on the card are being used or copied. Caution: To avoid losing data, don’t remove the memory card while files on the card are in use. 2 Open My Computer and right-click the drive icon for the memory card you want to remove.
Need help?
Do you have a question about the AUA-7500A and is the answer not in the manual?
Questions and answers