Related Manuals for ICP Novell NetWare
Summary of Contents for ICP Novell NetWare
- Page 2 After having explained in chapters B and C the installation of the ICP Controller as well as that of the host-drives, we would now like to give you some hints and pieces of advice on how to install Novell's operating system Novell NetWare. We shall mainly focus on NetWare 3.x and NetWare 4.x.
- Page 3 (i.e., for controller duplexing), the above mentioned driver has to be called upon several times. But as it is re-entrant, it is only loaded once. A single ICP Controller can be chosen by selecting its PCI slot number.
- Page 4 PCI-Systems which are not equipped with an EISA-Bus behave in the same way as an ISA mainboard with regard to the available RAM memory. NetWare therefore does not auto- matically recognize the available memory above 16 MByte. The command 'Register Memory' allows the registration of memory above 16 MByte.
- Page 5 Therefore, care should be taken not to go below 0.8 seconds. If an ICP Controller is operated under NetWare together with a further controller / hostadap- ter which does not support the ASPI standard, SCSI Raw Devices cannot be operated on both controllers (tapes, CD-ROMs).
- Page 6 This page is intentionally left blank.