Powering The Camera On - Vivitar ViviCam T325 User Manual

When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.

Powering the Camera ON

1) Battery
Make sure the battery it is fully charged before the first use.
To charge your battery, follow one of the steps below:
A. Charge the battery using the USB connection cable (included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end of the USB cable to the USB port on your computer.
B. Charge the battery using the AC Adapter (included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end to the AC Adapter and then plug the AC Adapter into a power
socket.
5