Vivitar ViviCam T022 User Manual page 9

Note:

After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD card.
3) Power On
Press the POWER button to turn on the camera.
NOTE:
1) Limited internal memory is provided for test images. The images will be deleted when
the camera's power is turned off or if the batteries are removed. Please download the
images before turning off.
2) If there is a photo in the internal memory when you insert the card into your camera, a
"Copy to card" message will appear on the LCD with 'Yes' or 'No' options. On selecting
'Yes' the photo will now be copied to your card.
8