Table of Contents
Advertisement
the camera is in Macro mode.
When Macro is off, the mountain icon
The Macro option is „Off‟ by default when you start using your camera.
Anti-Shake ON – Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake
option is „On‟ by default when you start using your camera and assists you in properly
focusing the image.
Distance from the camera – The subject‟s face must be no further than 8 to 9 feet
(3.5 meters) from the camera and the face must cover at least 20% (1 / 5th) of the
picture previewed on the LCD screen.
Facing the camera – The face of the subject(s) you are photographing must be
facing the camera and must hold the pose for at least 4 to 5 seconds until the green
square(s) appears around the subject‟s face.
Face Detect will not work with a side shot of the subject‟s head.
1) Press the MENU (M) button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Face
Detect menu.
3) Press the UP or DOWN direction control buttons to scroll through the menu
options.
4) Press the MENU (M) button to select and save the desired option, exit the menu
screen and return to your previous mode.
5) An icon reflecting your selection will display on the LCD screen.
6) Remember that this setting will be saved by your camera until you manually
change the setting or restore the camera‟s default factory settings.
appears on the LCD display.
22
Advertisement
Table of Contents
