Table of Contents
Advertisement
Powering the Camera On/Off
Powering the camera ON
1)
Make sure the batteries have been inserted properly into your digital camera.
Use 2x AAA (1.5v) batteries (not included). Alkaline batteries recommended.
2)
Make sure an SD card has been properly inserted into your camera (until a click sound is
heard). SD Memory card not included.
NOTE: After the camera is powered on, an SD icon will appear on the LCD display.
If you do not see the SD icon on the display, please check if the card was inserted properly.
3)
Press the POWER
4)
The camera will be in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power
camera OFF. You will see a "Goodbye" splash screen and then the camera will power off
completely.
NOTE: Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the Auto Power Off settings menu.
Changing Camera Mode
Your camera has three main modes:
1)
Photo Capture Mode - Use this mode to capture photos with your camera.
2)
Video Capture Mode - Use this mode to capture videos with your camera.
3)
Playback Mode (for photos and videos) - Use this mode to view the photos and videos
you have already taken with your camera.
When the camera is first powered ON, the Photo Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and
button to turn on the camera.
9
button again at any point to turn your
Hide quick links:
Advertisement
Table of Contents
