Appendix A.1 Specifications - Teledyne 3300TA Operating Instructions Manual

Trace Oxygen Analyzer
A.1 Specifications
System Operating Temp:
System Power Requirement:
Appendix
Ranges:
Signal Output:
Range ID:
Display:
Alarms:
Accuracy:
Response Time:
System Enclosure:
Teledyne Analytical Instruments
Two user selectable ranges can be set
between 0-10 ppm and 0-9999 ppm
oxygen, and a 0-25 % (nominal) Air Cali-
bration Range.
Voltage: 0–10 V dc, negative ground
Current: 4-20 mA, negative ground
0-10 V dc.
Light emitting diode (LED) display.
One high alarm relay, adjustable; one low
alarm relay, adjustable; one sensor failure
relay. (All are failsafe.)
0-50 °C
±2 % of full scale at constant temperature
±5 % of full scale through operating tem-
perature range (At 100 ppm and higher user
defined ranges) once temperature equilib-
rium is reached.
±1 ppm for 10 ppm range under above
conditions.
90 % in less than 65 seconds at 25 °C
(68 °F).
AC (100-240 VAC, 50/60Hz), or
DC (10-36 VDC); user specified.
Rack Mount with handles:
19" H × 7.0" W × 6.25" D.
Appendix
A-1