Advertisement
Quick Links
Calibre 887
Automatic Movement Operation Manual
Automatic watches can be used only by those who are reasonably active as the automatic
winding relies on a regular movement of the wrist. The watch must be given an initial manual
wind of 8 to 10 turns and provided that it is worn on the wrist for a minimum of 8 hours each
day it will continue to function indefinitely and may be taken off the wrist for a maximum period
of 30 hours. If this period is exceeded the movement will stop and another manual wind will be
necessary. It must be remembered that when worn in bed the movement of the wrist is
insufficient to operate the automatic winding.
Time Stand Accuracy
1)
21,600 beats per hours
2)
Accuracy between -30 to +30 seconds per day worn under normal conditions.
Butterfly Strap Adjusting Instruction
Page 1
Instructions for Time Setting
1)
Unscrew and pull the crown out to Second position and turn the crown anti-clockwise
until the day of the week is correct. The day and date will now be correct, now set the
time but make sure the time is set onto am or pm.
2)
The 12/24 hour dial will show AM or PM.
3)
Finally push and screw the crown into normal position.
Instructions for Chronograph Operation
1)
Unscrew both Button A and Button B.
2)
The chronograph can be started and stopped each time button "A" is pressed.
3)
Pressing button "B" resets the chronograph and the chronograph second and minute
hand return to zero position.
4)
Finally once finished with the chronograph function, screw both the button A & B to
normal position.
Page 4
Water Resistance Table
Level of
Suitable for
Can
Suitable for
Suitable for
Water
Everyday
withstand
Swimming
Pool Size
Resistance
use
accidental
splashing
None
Yes
No
No
No
3 ATM
Yes
Yes
No
No
(30m/
100ft
5 ATM
Yes
Yes
Yes
Yes
(50m/
150ft)
10 ATM
Yes
Yes
Yes
Yes
(100m/
300 ft)
& Above
Water resistance is not permanent. In the course of time, the gaskets of the case and
crown may become worn and reduce the water resistance of your watch. We recommend
the periodic checking
Normal Crown – always make sure it is pushed fully into case
Screw down Crown – tighten screw down crown completely to screw lock position.
To maintain water –resistance crystal, crown and case must remain intact
Exposure to Salt Water
If your watch is designed for sports or working in the water and it becomes exposed to salt
water or significant amounts of perspiration, it should be rinsed in fresh water and dried
thoroughly with a soft dry cloth.
Important
Buttons must not be operated while in contact with water
Page 2
Instructions for setting Moon Phase Display
Important
It is advisable the Moon Phase is set according to the dates mention on a table. I.e.
nd
February 02
2007 full moon is situated in the centre of the dial.
1)
Unscrew and pull crown out to first position and turn crown clockwise until full
moon is situated in the centre of a dial.
2)
Now set the correct date and time following the above procedures and making
sure time set to AM or PM.
3)
Finally push and screw the crown back to Normal Position.
Full Moon Dates
2010
2011
Jan
30
19
Feb
28
18
Mar
30
19
Apr
28
18
May
27
17
Jun
26
15
Jul
26
15
Aug
24
13
Sep
23
12
Oct
23
12
Nov
21
10
Dec
21
10
Page 5
Functions
-
Hours
Suitable
Suitable for
for
high board
-
Minutes
snorkelling
diving or sub-
or water
aqua diving
-
Seconds
sports
-
Day of the Week
-
Date & Month
No
No
-
12 Hour Chronograph
No
No
-
12/24 Hour dial
-
Moon Phase
No
No
-
Water Resistance – Check the back of the watch and refer to the Table.
Yes
No
Instructions For Setting Day, Date and Month
Important
• Do not set the day & date between 06.00 PM and 06.00 AM, as this may cause
damage to the movement.
• At the end of the each month the date & month is required to be changed manually.
1)
To achieve an accurate day of the week setting, unscrew and press button C
until a day prior to the day you require is achieve i.e. if today is Wednesday then
set in onto Tuesday
2)
To achieve and accurate date and month setting, unscrew and pull the crown
out to first position and rotate anticlockwise until correct month is achieved. Now
rotate the further until a date prior to the date you required is achieve i.e. if today
is the 16
3)
Finally screw the crown and button C into normal position.
2012
2013
09
27
07
25
08
27
06
25
06
25
04
23
03
22
02 & 31
21
30
19
29
18
28
17
28
17
th
th
then set it onto the 15
Page 3
Calibre 887
IN6106
Page 6
Advertisement
