Table of Contents
Advertisement
must be connected to the X-Micro Combo Bluetooth Printer Adapter now
Previous sections talk about how to do a printing job with a X-Micro
Combo Bluetooth Printer Adapter. This section is talking about when mul-
tiple adapters are installed in your office, how to configure each adapter
before printing ? Supposed there are three X-Micro Combo Bluetooth Printer
Adapter, two of them are connected to two EPSON Stylus C61 printers
and one is connected to an EPSON Stylus Photo 830U printer separately.
If you power on three X-Micro Combo Bluetooth Printer Adapter, then
from
My Bluetooth
three X-Micro Combo Bluetooth Printer Adapter will be found. Each of
them have a series number, so it is easy to configure printer driver for
them.
In the following example, we assume :
BT-PRT-B0A351 is connecting to
EPSON Stylus C61.
BT-PRT-B0A352 is connecting to
EPSON Stylus C61.
BT-PRT-B0A353 is connecting to
EPSON Stylus Photo 830U.
Places, click the
EPSON Stylus C61
(Sales_Dept)
Entire Bluetooth
EPSON Stylus C61 (RD_Dept)
EPSON Stylus Photo 830U (Adm_Dept)
18
Neighborhood,
Advertisement
Table of Contents
