Operation - White and Brown DB 741 BLOW IRON User Manual

Notice DB 741:Notice DB 713
FILLING THE BOILER WITH THE WATER
FILLING THE BOILER WITH THE WATER
• Before filling the tank, make sure the appliance is unplugged from the mains.
• Remove the boiler cap (2) and fill the tank with water.
• Replace the cap securely by pressing down and rotating it clockwise until it stops.
Plug in.
IMPORTANT : never unscrew the cap (2) when the boiler is under pressure.
• Select the desired temperature by turning adjustable thermostat (9) according to the kind of
fabric to iron (see table below).
- Plug in.
- Place button (6) on
ironing for best regulation of temperature.
- When steam is ready, the indicator light (4) appears.
Iron temperature regulation
Important : • when switching on the iron, keep knob in the maximum steam output position.
• Push 2 or 3 times the steam delivery button before ironing. This will ensure a regular steam
production when you start ironing.
WARNING : the iron steam generator connecting hose may become hot. Be careful not to be
burned.
10/12/09 9:16

OPERATION

OPERATION
. The indictor light (8) of the iron shines. It will light on and off during
13
Page 13
Acetate, acrylic, nylon, polyester, rayon
Silk, wool
Cotton, linen, starched clothes