Page 1
Technical Manual for the Strobe – XB12 Please note that every care has been taken to ensure the accuracy of our technical manual. We do not, however, accept responsibility for damage, loss or expense resulting from any error or omission. We reserve the right to make alterations in line with technical advances and industry standards.
Page 2
1. INTRODUCTION These strobe units have been designed for use in harsh environmental conditions. 2. INSTALLATION General When installing and operating explosion-protected electrical equipment, require- ments for selection, installation and operation should be referred to eg. IEC 60079-14 worldwide and the ‘National Electrical Code’ in North America. Additional national and/or local requirements may apply.
Page 3
3. OPERATION The unit is initiated directly from the power source. GENERAL ARRANGEMENT . " " 60mm 60mm Ø " Ø 11mm " 30mm " 60mm " 60mm 2 OFF " / 6mm Ø 9 " / 243mm M8 x "...
Page 4
6. CERTIFIED TEMPERATURE –55 C to +55 C –67 F to +131 F MEDC Ltd, Colliery Road, Pinxton, Nottingham NG16 6JF, UK. Tel: +44 (0)1773 864100 Fax: +44 (0)1773 582800 Sales Enq. Fax: +44 (0)1773 582830 Sales Orders Fax: +44 (0)1773 582832 MEDC Stock No.
Need help?
Do you have a question about the MEDC XB12 and is the answer not in the manual?
Questions and answers