Connection Guide - Monster Power Signature MPA2250 Owner's Manual

The following section will guide you through the steps required to connect your Monster Power Amplifiers to the rest
of your system. Read through this section carefully before connecting.
This section has been broken into steps for each amplifier. For a complete system diagram see Appendix A.
INPUT CONNECTIONS
A. The Signature Monster Amplifiers provide both unbalanced (RCA) type and balanced (XLR) type connections
for use with a variety of systems. Should your Receiver/preamp Processor have both types of connections,
Monster recommends using balanced connections for cleaner more accurate sonic reproduction. Please refer
to your Receiver/preamp Processor owners manual for the available connection types.
CAUTION: Never connect both balanced and unbalanced to the same input.
Damage to components may occur.
For unbalanced RCA type connections please follow Step 1A for each amplifier.
For balanced XLR type connections, please follow Step 1B for each amplifier.
B. Input connections are marked with the channel name they are intended for. In some situations the channel
input may be from a different channel. Please make note of which channel you use if a channel other then
the one marked is used.
In addition to naming them, the inputs are marked by color in the following manner.
RED
GREEN
BLUE

CONNECTION GUIDE

Unbalanced RCA Input
Balanced XLR Input
Right Channel
Center Channel
Left Channel
8