1. Manuals
  2. Brands
  3. System Fidelity Manuals
  4. Tuner
  5. ST-250
  6. Instruction manuals

System Fidelity ST-250 Instruction Manuals

Am/fm stereo tuner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for System Fidelity ST-250

Summary of Contents for System Fidelity ST-250

  • Page 2: Table Of Contents

    OPERATION AND FUNCTIONS TROUBLESHOOTING TECHNICAL DATA ACCESSORIES Accessories 1 x ST-250 Integrated Amplifier 1 x Remote control 2 x Batteries (Optional) 1 x Operation Manual This operation manual supplies all the information that you need to have about your System Fidelity FM/AM tuner.

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS A triangle with a lightning symbol draws the user’s attention to “dangerous voltage” without insulation in the cabinet which may be high enough to entail a risk of electric shock. A triangle with an exclamation mark draws the user’s attention to important instructions for use and maintenance in the accompanying manual, which should be studied.
  • Page 4 Ventilation The cabinet is provided with slots and openings to ensure ventilation and reliable operation and to protect the unit against overheating. Do not block or cover these openings. The openings must never be blocked, for instance by placing the unit on a bed, a sofa, a carpet or similar surface . Heat Do not place the unit near sources of heat such as radiators, heat registers, ovens or other units that produce heat.
  • Page 5 must be made as incorrect setting may result in damage and often will make it difficult for a qualified technician to make the unit work properly again. E) If the unit has been dropped or damaged in any other way. F) When the operation of the unit changes drastically, the unit requires service.

  • Page 6: Important Information

    NOTES ON INSTALLATION Your System Fidelity SA-250 should be placed on a firm, level surface. Avoid placing it in direct sunlight or near sources of heat and damp. Always allow adequate ventilation and don’t place it on a soft surface like a carpet. Don’t place it in an enclosed position such a bookcase or cabinet that may impede the air-flow through the ventilation holes.

  • Page 7: Connections To The Mains

    About connection to the mains Do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before turning on the power. Check that the mains voltage is 230-240V AC50Hz before turning on the power. Check that all other connections have been made correctly before inserting the mains plug into the wall socket.

  • Page 8: Remote Control Functions

    (2) 1-10 : Selects stored stations. If depressed for more than two seconds, a station is stored under the number concerned. (1) Power: Sets the ST-250 in standby mode. (6) Autotune: Press once to automatic tune in to AM/FM stations. Depress button for two seconds to initiate an automatic search.

  • Page 9: Front/Rear Panel

    FRONT PANEL DESCRIPTION (1) Mains switch : Used to switch on and off the unit by switching the mains voltage. (2) LED indicator: Lights blue indicating that the CD-player is on stand-by mode. Switched off when the CD-player is in operation and LCD display is lit. (3) LCD display: main display displaying most of the function performed.

  • Page 10: Audio Connections

    - When make the connection, please refer to the connection diagram. Make sure that all the units are switched off during any connection. The RCA sockets on your ST-250 are color coded for your convenience. Red and white are RIGHT and LEFT audio respectively.

  • Page 11: Operation And Functions

    OPERATION AND FUNCTIONS On, Off and standby 1. Turn on the unit by pressing the mains switch. 2. Press the standby button on the remote control to switch to standby mode. The display will turn off and all functions will be reduced to a minimum to make sure that the unit uses minimal power. Note: When in standby mode the unit only reacts to the standby button of the remote control.

  • Page 12: Selecting Presets

    Tuning Automatic tuning When the unit is turned on for the first time, all settings will be default settings. The settings can be changed according to your preference. When the unit is turned off the next time, these settings will naturally be saved as the new default settings.

  • Page 13: Troubleshooting

    No sound. - Incorrect connection to the amplifier. - No loudspeakers have been connected to the amplifier. - The ST-250 has not found any stations. - The ST-250 has not found any stations. The display does not show - The selected station does not broadcast RDS information.

Table of Contents