Advertisement
5
• Fit the tabs on a rear wheel cap into the slots in the rear
wheel hub. Push to "snap" the rear wheel cap in place.
• Repeat this procedure to attach the other rear wheel cap
to the other wheel hub.
Pedal Axle Tab
6
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fi t into the slot in each pedal hub.
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are fl ush with the surface of the front wheel.
• Repeat this procedure on the other side with the other
two pedal hubs.
Assembly
Rear Wheel Hub
Rear Wheel Cap
Pedal Hub
Pedal Hub
5
Front Wheel
Assembly
Fork Cover
7
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fi ts into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
8
• Fit the lower steering ring onto the frame, as shown.
Fork Arms
Pedal Axle
Lower Steering Ring
Groove
Advertisement
