Global Array Manager Server Software for Solaris 7 and Solaris 8
Global Array Manager Server Software for
Solaris 7 and Solaris 8
Creating the Global Array Manager Server Diskette
Before installing the GAM Server for Solaris, a diskette must be created
according to the instructions below using a DOS or Windows operating
system.
This diskette will be used in the next section wherever instructed to insert the
"GAM Server diskette for Solaris."
1. Insert a DOS formatted diskette into drive A.
2. Insert the Software Kit CD-ROM into the CD-ROM drive.
3. From the DOS prompt, type:
F:\gam\solaris\x86\diskimg\gamssol7 a:
F:\gam\solaris\x86\diskimg\gamssol8 a:
F: identifies the CD-ROM drive.
\gamssol7: identifies Solaris 7 and \gamssol8: identifies Solaris 8
4. You will get a message asking if you want the disk to be overwritten.
To continue, type Y for Yes and press Enter .
5. Label this disk "GAM Server diskette for Solaris." Save until needed.
Note
After creating this diskette, DOS is not able to read it.
An alternative method to create this diskette is described in Appendix C,
"Creating a GAM Server Installation Diskette" .
6-2
Global Array Manager Server Software Manual
Need help?
Do you have a question about the Global Array Manager and is the answer not in the manual?
Questions and answers