Advertisement
Ripstation
Q
U
Q
U
Thanks for purchasing a Ripstation from MF
Step-by-step guide of Robotic hardware
Place the system on a level workspace free of debris, dust, humidity,
excessive heat, and electronic or electromagnetic interference.
Keep out of direct sunlight.
Allow at least six inches of clearance on all sides of unit for ventilation.
Remove Pick Head Tie-Down
Plug in a monitor, keyboard and mouse (PS2 or USB) to the Ripstation
Attach the enclosed Ethernet cable.
Using the enclosed 3-prong power cord, plug in the autoloader to a properly grounded
AC receptacle.
It is highly recommended that a surge protector is used to ensure safety in operation.
Power on the unit using the main switch at the back and the rocker switch.
Windows will now load and you will see the Ripfactory Desktop
Double click the icon for Ripstation to run the ripper application.
www.mfdigital.com
For complete instructions see the user manual located on the desktop of your system
I
C
K
C
O
I
C
K
C
O
Ripstation
1. The RipStation robotic hardware system
2. Power cable & Lan Cable
3. Windows XP CD Pack
4. User Manual is on the Desktop of System
STEP ONE – Remove the Packing Constraints
STEP TWO – Start Up
N
N
E
C
T
N
N
E
C
T
Digital. In this box you should find:
G
U
I
D
E
G
U
I
D
E
Rev 12-13-07
Advertisement
Table of Contents
Need help?
Do you have a question about the Ripstation series and is the answer not in the manual?
Questions and answers