Wireless indoor/outdoor thermometer with alarm clock (10 pages)
Summary of Contents for Meade TE278W-M
Page 1
TE278W-M Wireless Indoor/ Outdoor Thermometer with Atomic Clock...
Page 2
Meade Instruments now brings that same passion for innovation and high performance to its own line of precision, feature rich weather stations. Please read this instruction manual so that you can get the most enjoyment out of your Meade Instruments weather station.
PRODUCT OVERVIEW MAIN UNIT FEATURES • Time automatically sets to the US Atomic Clock • 12 or 24 hours time format • Dual crescendo time alarm with snooze • Day of the week displayed in English, Spanish, French, German and Italian •...
D. MODE button • Toggles between time modes - time with seconds and time with the day of the week • Activates clock’s manual programming mode E. DOWN ( ? ) button • Decreases the parameters • Activates manual remote channels search •...
Page 5
A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit. • Flashes twice when battery power is low. B. BATTERY COMPARTMENT • Requires two AA-size batteries C. RESET • Resets all previous settings D.
BATTERY INSTALLATION REMOTE SENSOR NOTE: Install the batteries and select the channel before mounting the remote sensor. • Remove the screws from the battery compartment with a small Phillips screwdriver (not included). • Set the channel 1 through 3. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote sensor is being used.
GETTING STARTED After batteries are installed; remote sensor will transmit temperature data at 45 second intervals. The main unit may take up to two minutes to receive the initial readings. Upon successful reception, remote temperature will appear on the top line of the main unit’s display (the default remote channel is channel one).
If there is no reception, please perform the following steps: • Bring the main unit and remote sensor close together. • Remove four (4) small screws from the back of the remote sensor with small Phillips screwdriver, and open the battery compartment. •...
Page 9
TIME AND CALENDAR DISPLAY MODES The unit displays current time in two display modes, in “hour-minutes-seconds” format and in “hour-minutes-day” format. The calendar is displayed in month-date format. MANUAL SETTINGS It is necessary to set the desired US TIME ZONE. TIME ZONE •...
SETTING THE ICE WARNING ALARM (PRE-AL) If Weekday (W) or Single day (S) alarm is set, the Ice Warning Alarm (Pre-AL) can be programmed. • Press ALARM button once to enter into the Ice Warning Alarm setting mode. The abbreviation OFF with a PRE-AL next to it will be displayed. •...
SPECIFICATIONS Main Unit Indoor Temperature Operating range: 23.0°F to 122.0°F (-5°C to +50°C) Temperature resolution: 0.2°F (0.1°C) User-selectable (°F or °C) temperature display Maximum number of remote sensors: 3 (one included) Readings update interval: every 45 seconds Low battery indicators – for each remote channel and main unit Clock Precise atomic time 4 US Time Zones...
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY Name: Meade Instruments Corp. Address: 27 Hubble, Irvine, CA 92618 - 4209 declare that the product Product No.: TE278NLW...
• If batteries or parts are swallowed, see a doctor immediately. STANDARD WARRANTY INFORMATION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.S.A.
Need help?
Do you have a question about the TE278W-M and is the answer not in the manual?
Questions and answers