Honda 2008 Accord Navigation Manual page 128

Problem
Daylight savings time occurred, but the navigation system did
not change time even though SETUP shows Auto Daylight
is ON.
The navigation system automatic daylight time feature is not
switching the navigation system clock on the correct dates.
Why is this?
The navigation system clock switched by one hour for no
apparent reason. What can cause this?
My battery was disconnected, or went dead, and the
navigation system is asking for a code. Where do I find this
code?
I speak a language other than English. When will other
languages be available for the navigation system?
Go to the Clock adjustment screen in SETUP and select DST Selection.
Ensure that the correct DST schedule is selected. For more information, see
Clock Adjustment on page 93.
1) Go to the Clock adjustment screen in SETUP and ensure that Auto
Daylight is ON.
2) The navigation system is designed to switch to daylight savings time
according to the months selected in the DST schedule selection screen.
Ensure that the appropriate schedule is selected.
For more information, see Clock Adjustment on page 93.
1) You may be driving near a time zone boundary (see Auto Daylight on
page 94).
2) The navigation system does not, or incorrectly switches between
standard and Daylight Savings Time. Set Auto Daylight to ON on the
Clock adjustment screen in SETUP, and ensure that the correct month
switching schedule is chosen on the DST schedule selection screen.
See page 94 for more information.
There should have been a card in the glove box with the anti-theft code for
the navigation/audio system. This card contains the 4-digit security code
and serial number. If you cannot find it, your dealer can help you out.
This is being considered as a future enhancement.
Frequently Asked Questions
Solution
Navigation System 127