Change Picture And Sound Settings - Philips 52PFL8605S/98 User Manual

Watch TV Watch TV Browse USB B
Add your devices
Setup
2
Press the Navigation buttons to select a
home menu item:
[Watch TV]Switches back to the
•
antenna source if another source is
selected.
[Browse USB]Accesses the content
•
browser of the connected USB
storage device.
(For PFL8605 only)[Browse
•
PC]Accesses the content browser of
the connected PC network.
[Scenea]Switches to the Scenea
•
wallpaper.
[Add your devices]Adds new devices
•
to the home menu.
• [Setup]Accesses menus to change
picture, sound and other settings.
3
Press OK to confirm your choice.
Tip
•
Press (Home) to exit the home menu.
•
(Back) to exit the [Setup] menu.
Press
•
Press (Options) to exit an options menu.
Remove devices from the home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1
Press (Home).
» The home menu appears.
2
Press the Navigation buttons to select a
device to remove.
3
Press (Options).
A list appears, with
»
device] selected.
Browse PC Scenea
[Remove this
4
Press OK.
Follow the on-screen instructions to
»
remove the device. Once complete, the
device is removed from the home menu.
Access the browse menu
1
When watching TV, press
The browse menu appears.
»
2
Press to select:
• [Channel list] Accesses TV channel list.
• [Teletext] Accesses teletext.
3
Press OK to confirm your choice.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
Note
•
The flexibility to change settings is limited if the
TV location is set to [Shop] mode. Set the TV
location to [Home] mode to access all TV settings
(see 'Change TV preferences' on page 24).
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1
When watching TV, press
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup], then press OK.
3
Select [Personalise picture and sound],
then press OK.
A message appears prompting you to
»
start the settings assistant.
4
Select [Start] and press OK.
» Follow the on-screen instructions.
(Browse).
(Home).
EN
11