Honda 2008 Accord Coupe Owner's Manual page 331

4. Install the new bulb and turn it
clockwise to lock it in place.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Passenger's side
Reinstall the coolant reserve tank.
Replacing a Front Side Marker
Light Bulb
HOLDING CLIPS
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Lights
BULB
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
CONTINUED
325