Honda 2008 Civic Coupe Owner's Manual page 89

To program the Drive Lock mode:
Locks both doors when the vehicle's
speed reaches about 9 mph (15 km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. push and hold the
On A/T vehicles,
brake pedal, and move the shift
lever out of the Park (P) position.
4. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
On A/T vehicles, move the shift
lever to the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Door Locks
Auto Door Unlocking
The auto door unlocking feature has
five possible settings:
The auto door unlocking is
deactivated all the time.
the driver's door
On A/T vehicles,
unlocks when you move the shift
lever to the Park (P) position.
This is the default setting.
Both doors unlock when you move
the shift lever to the Park (P)
position (A/T vehicles).
The driver's door unlocks
whenever you turn the ignition
switch to the ACCESSORY (I)
position.
This is the default setting on M/T
vehicles.
Both doors unlock whenever you
turn the ignition switch to the
ACCESSORY (I) position.
CONTINUED
83