How To Use; Accessories - Sanitaire S3680 Series Owner's Manual

HOW TO USE

CAUTION: Moving parts. Make sure on/off switch is in
off position before plugging in.
A carpet should be cleaned regularly over heavily traveled
areas, and once a week over the entire carpeted area.
Vacuum slowly, making several passes (forward and
backward) over the carpet, covering small areas at a
time. The time required to clean the carpet will depend on
several factors–including type of carpet and amount of dirt.
Connect Hose Connect Hose
1
Rotate Swivel Hook to Rotate Swivel Hook to
2
release cord
3 Plug In
Swivel Hook
4 Store Tools
Crevice Tool
HEPA HEPA
Filter
(on some
models)
Blower Feature
5
(on some models)
Blower
6
Push ON/OFF Switch
(A thermostat automatically shuts the motor off if it
overheats, see Automatic Motor Shut-Off)
ON/OFF ON/OFF Switch
Automatic Motor Shut-Off
To protect from overheating, this vacuum cleaner is
equipped with a thermostat which automatically shuts off
the motor if it overheats. Should this happen:
1. Turn off the switch and unplug the cleaner because
the thermostat will allow the cleaner to automatically
start running again when the motor cools (approximately
30 minutes).
2. Check the hose, bag and filter regularly, as a clogged
hose, full bag or dirty filter could cause the motor to
overheat.
3. Call a Eureka Service Station if the cleaner will not
operate after cooling for approximately 30 minutes.
Cleaning Accessories
Attach wands and cleaning tools
(Wands may vary by model)
Open the Slip
Ring to reduce
suction.
Tool Caddy
Combination
Floor Tool
3