Table of Contents
Advertisement
LaCie Slim Blu-ray •
User Manual
2. Connecting Your LaCie Slim Blu-ray
2.1. Connecting the USB 2.0 Y Cable
1. Connect the Y cable's primary Hi-Speed USB 2.0 A connector
(see
1.4. Cables and
Connections) to an available USB 2.0 port
on your computer.
IMPORTANT INFO:
The Y cable has two USB 2.0 connectors: the
primary A connector for signal and power and the secondary A con-
nector for additional power, if necessary. The difference is clearly
marked by a lightning bolt sticker on the secondary (power only)
connector. You must connect the primary A connector in order to
send and receive data. See
1.4. Cables and
2. Attach the other end (mini USB) of the USB 2.0 Y cable to your
LaCie Slim Blu-ray. See
Fig. 07
3. Your drive should now be ready for use. To verify that your drive
is correctly installed and communicating with your computer,
follow these steps:
✦ Windows Users
– Right-click
My Computer
eral. Your drive should be listed.
✦ Mac Users
– In the Apple menu, choose About This Mac > More Info
to open the
Apple System
listed under Hardware.
4. If your Slim Blu-ray does not appear to be receiving adequate
power, attach the secondary USB 2.0 A plug (with the lightning
sticker) to an available USB 2.0 port on your computer. See
Fig.
08.
TECHNICAL NOTE:
Your drive must be connected to a USB 2.0
port. Performance is not guaranteed with USB 1.1. See section
Cables and
Connections.
TECHNICAL NOTE:
For more information on USB connections,
see sections
1.4. Cables and Connections
&
Answers.
IMPORTANT INFO:
The LaCie Slim Blu-ray includes a power
supply connection (see
1.2. Minimum System
accept an external power supply (not included).
D
s
H
esign by
am
ecHt
Connections.
to select Properties > Gen-
Profiler. Your drive should be
and
4.7. USB Questions
Requirements) that will
Fig. 07
1.4.
Fig. 08
Getting Connected
page 14
Advertisement
Table of Contents
