Running The Software; Uninstalling The Software; Software Updates - Kenwood ARCP-2000 Instruction Manual

4 When the help file language selection appears, select
your desired language.
• You cannot install a different language help file after
installation. You must reinstall the software to select the
new language.
5 All files are copied to the destination folder and the
setup program ends. If the program asks you to
restart the computer, click "Yes".

RUNNING THE SOFTWARE

After installation, the ARCP-2000 menu will be added to
your Start menu.
1 Select ARCP-2000 from the Start menu.
2 When you select and run the ARCP-2000 software for
the first time, the program asks you for the license ID
number.
3 Enter the license ID number (refer to the two supplied
labels), then click "OK".
• We do not re-issue license ID numbers. We
recommend you attach one of the labels to the
front cover of this manual and/or the CD-ROM
protective cover to avoid any accidental loss.
4 When the correct license ID number is entered, the
ARCP-2000 program starts.
2
USING THE ARCP-2000
The ARCP-2000 operation instructions are provided in the
Help file. Click "Help" in the main menu bar and refer to the
instructions.

UNINSTALLING THE SOFTWARE

1 Open the Control Panel window.
2 Double click the "Add/Remove Programs" icon.
3 Select ARCP-2000, then click the "Add/Remove..."
button.
4 The "Confirm File Deletion window" opens. Click the
"Yes" button to delete the ARCP-2000 program files.
• You must manually delete any ARCP-2000 files that you
created.

SOFTWARE UPDATES

The latest update of the ARCP-2000 software is available
on KENWOOD's web site:
http://www.kenwoodcorp.com/i/Products/info/amateur.html
Note:
Windows is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
Intel and Pentium are registered trademarks of Intel Corporation in
the United States and/or other countries.