Advertisement
5
Pedal Axle
Slot
• Fit two pedal hubs onto the pedal axle metal tabs. Make
sure the metal tabs fit into the slot in each pedal hub.
6
Pedal Hubs
Pedal Axle
Hole
• While holding the pedal hubs on the pedal axle,
insert the pedal axle into the hole in the center of the
front wheel.
7
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
© 2001 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
BARBIE is a U. S. trademark of Mattel, Inc.
Assembly
Metal Tab
Pedal Hub
Front Wheel
Pedal Hubs
Pedal Hub
8
Pedal Hub
• Turn the front wheel assembly over.
• Insert a pedal hub onto the top of the pedal axle and
into the hole in the center of the front wheel.
• Insert the remaining pedal hub below the pedal axle
and into the hole in the center of the front wheel.
9
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
10
• Place a scrap block of wood under the front
wheel assembly.
• Fit a pedal on the pedal axle.
• Tap the pedal with a hammer until it is secure.
• Repeat this procedure to attach the other pedal to the
other end of the pedal axle.
4
Pedal Axle
Pedal Hubs
Pedal
Pedal Axle
Front Wheel
Assembly
Scrap Block
of Wood
Printed in Mexico
72639c-0920
Advertisement
