Various Settings (Function Mode); Basic Operation In Function Mode; Saving The Settings (Memory Backup) - Roland RP301 Owner's Manual

& &

Various Settings (Function Mode)

Function mode lets you make various settings for this unit.

Basic Operation in Function Mode

Here's the basic procedure for making settings in Function mode.
1.
Hold down the [Key Touch] button and press the [Twin
Piano] button .
The display will indicate "
Function mode.
2.
Press the [–] [+] buttons to select the function setting (F01
– F08) that you want to change .
Reference
For details on each function setting (
"Function Settings" (p. 13).
3.
Press the [Metronome] button .
This confirms the function setting that you want to edit; the display
will indicate the value of that setting.
4.
Press the [–] [+] buttons to edit the value of the setting .
Reference
For details on the values of each function, refer to "Function
Settings" (p. 13).
MEMO
By pressing the [Metronome] button you can return to the
function setting screen (
function settings, repeat steps 2–4.
5.
Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode .
12
" (or – ); the unit is now in
F01 F02 F08
F01 – F08 ), refer to
– ). If you want to edit other
F01 F08
Saving the Settings (Memory
Backup)
When this unit's power is turned off, it will return to its default
settings. However, if desired, you can save the following settings
so that they will be remembered even after the power is off. This is
called the "Memory Backup" function.
Settings saved by Memory Backup
Key Touch
Twin Piano Mode
Reverb
Brilliance
Master Tuning
1.
Hold down the [Key Touch] button and press the [Twin
Piano] button .
The display will indicate " F01
Function mode.
2.
Press the [+] button a number of times until "F08" is
shown in the display .
3.
Press the [Metronome] button .
The display will indicate " Sur
button will blink.
If you decide not to save the settings, press the [–] button.
4.
To save the settings, press the [+] button .
When the memory backup has been completed, the display will
indicate " F08 . "
5.
Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode .
Page
p. 9
p. 8
p. 9
p. 9
p. 13
" (or F02 – F08 ); the unit is now in
" (Sure?), and the [–] button and [+]