Technical Specification - Joemeek SC4 User Manual

SC4 M&S DAD Stereo Compressor - User's guide

TECHNICAL SPECIFICATION

ANALOGUE SIGNAL PATH
INPUTS : XLR connectors. Floating electronic balanced inputs 20Kohm
impedance.
INSERT : unbalanced 1/4 inch jack.10Kohm nominal -10dB, source impedance
400 ohms.
OUTPUTS : Main analogue outputs XLR connectors. Auto centering electronic
balanced. Source impedance 75 ohms.
AUDIO PERFORMANCE
AMPLITUDE FREQUENCY RESPONSE : +0 -1dB 7Hz to 30KHz
(analogue path) +0 -1dB 10Hz to 20KHz digital path.
HARMONIC DISTORTION : less than 0.01% at all frequencies and levels
except under compression where 2nd harmonic distortion is generated by the
compression.
MAX. OUTPUT: +26dBu
NOISE : less than -84dBu (dynamic range exceeds 110dB)
DIGITAL SIGNAL PATH .INPUTS AND OUTPUTS
(optional on some models)
AES/EBU and TOSLINK OPTICAL.
CONVERSION PERFORMANCE : A/D 1 bit system producing 24 bit word at
128 times oversampling. D/A 24 bit word capacity. 128 times oversampling.
Analogue performance limited at high frequency by sample rate. At 48KHz,
system is 1 dB down at 22.5KHz.
Dynamic range capability : 115dB.
SC4 12