Table Of Contents - Singer 175-62 Service Manual

Table of Contents

Description3
Speed4
To Set Up The Machine4
Notice To Operator5
To Oil The Machines6
Needles8
To Thread The Machine9
To Release The Thread Nipper For Threading9
To Regulate The Thread Tension10
To Adjust The Pressure On The Button Clamp10
To Regulate Needle Bar Vibration10
To Regulate Forward And Backward Motion Of Button Clamp10
To Adjust Feed Plate For Dubbilstay Work11
To Adjust For Two-Hole And Four-Hole Flat Buttons11
To Change The Button Clamp11
Through And Through Stitching Flat Buttons Close To The Material11
Through And Through Stitching Flat Buttons Away From The Material12
Through And Through Stitching Metal Shank Buttons13
Remove/Replace Work Support For Through/Through Shank Buttons13
To Stop The Forward And Backward Motion Of The Feed Plate13
Through And Through Stitching Leather Shank Buttons14
Blind Stitching Flat Buttons Close To The Material15
To Adjust Work Support And Feed Plate For Blind Stitching Flat Buttons15
Blind Stitching Flat Buttons Away From The Material15
Blind Stitching Self-Shank Buttons16
To Change Work Support16
Blind Stitching Metal Shank Buttons16
Machine 175-63 Equipped For Sewing Snap Fasteners17
Varieties Of Buttons Sewn By The Machines And Fittings Required18
Hints For Ordering19
To Adjust The Stop Motion20
To Adjust Spring Tension Of Stop Motion Shaft20
To Adjust Stop Motion Pulley Shifter20
To Time The Looper Shaft Crank And The Looper Driving Shaft Crank20
To Set Needle Bar At Correct Height21
To Time The Needle Bar Vibration21
To Adjust Needle Bar Vibration Centrally21
To Adjust The Looper With Relation Fo The Needle22
To Time The Looper22
Needle Guide And Thread Control22
To Time The Button Clamp Feed Cam23
To Time The Automatic Tension23
To Adjust For Thread Control23
To Time The Needle Guide23
To Regulate The Height Of Lift Of The Button Clamp24
To Adjust The Automatic Tension24
To Adjust The Tension Of The Thread Pull-Off24
To Adjust The Timing Of The Thread Nipper24
Index25