Extender Stitches - Janome MC6600P Instruction Book

q
w
e
r
t

Extender stitches

Patterns 11, 12, 14, 15, 17, 18, 20 and 21 in Mode 2 are
extender stitches, which are used to insert straight stitches
after a stitch pattern.
Patterns 17, 18 and 21 will inherit the stitch length and needle
drop position of a previous pattern in the programmed pattern
combination.
Example:
Combination of patterns 12 (Mode 3) and 17
(Mode 2)
Two counts of the straight stitch are inserted after pattern 12.
q
Pattern 12 (Mode 3)
w
Two counts of straight stitch: Pattern 17 (Mode 2)
NOTES:
The number on the right of the stitch image indicates a stitch
count to be inserted.
A double headed arrow under the stitch count indicates that
the needle drop position will follow that of the previous pattern.
The stitch length and needle drop position of patterns 11, 13,
14, 15 and 20 are independent from those of the combined
pattern.
Example:
Combination of patterns 28 (Mode 3) and 15
(Mode 2)
Three counts of the straight stitch in the left needle drop
position are inserted after pattern 28.
e
Pattern 28 (Mode 3)
r
Three counts of straight stitch: Pattern 15 (Mode 2)
NOTE:
Patterns 11 and 12: Length 2.5 mm, center needle position
Patterns 14 and 15: Length 2.5 mm, left needle position
Pattern 20: Triple stitch, length 5.0 mm, center needle position
To insert a blank space, use pattern 99 in Mode 2.
After sewing, trim the connection thread.
t
Connecting thread
6 6