Playing Audio Via Bluetooth - iHome iDM8 Instruction Manual

Playing Audio Via Bluetooth

1. Move the Lock/Aux/Bluetooth Switch to the Bluetooth position (right) to listen to audio
streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
2. Press and hold the Power Button for 2 seconds to turn on the unit. The amber light will flash
as the unit searches for a previously paired device, and then turn green when a previously
paired device is detected.
3. Press the Play/Pause/Pairing Button to play or pause audio from your Bluetooth device.
NOTE: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices.
4. Use the Volume +/- Buttons to adjust volume.
5. When done listening, press the Power Button to turn the unit off.
iDM8
Using the
5