Grace Digital GDI-IRBM20 User Manual page 4

This Product is intended for North American markets. The GRACE Wireless Internet Radio GDI-IRBM20 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC
FCC Compliance and Advisory Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna
of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter."
This product may contain chemicals listed in
that may be known to cause cancer, birth defects or other reproductive harm
INSTALLATION
o Never install the unit where the unit may be subject to heat, water, dust, mechanical
vibration, mechanical shock, electromagnetic radiation sources including and not limited
to:
 Direct sunlight
 Air ducts or radiators
 Environments with dirt or dust
 Environments with moisture or rain
 Environments with mechanical vibration or shock
 Environments with electromagnetic radiation
OPERATIONAL USE
o Power the unit with the power adapter included.
o Do NOT cover the unit in any material such as cloth or plastic. IF the unit is covered in
this manner the temperature inside the unit and outside the unit may rise substantially.
Substantial temperature increase may result in a malfunction, product damage or
personal injury
o For best performance, the unit should be used in an ambient temperatures between
41F (5C) and 95F (35C). Avoid use in temperatures below 41F (5C) or above 95F (35C).
-
3 -
ADVISORY
ADVISORY
WARNING
Proposition 65
http://www.oehha.ca.gov/prop65/prop65_list/Newlist.html