Acute2 Head - Profoto Acute2 manual Manual

Acute2 head

The Acute2 head is fan cooled and it has an automatic voltage
selector for the fan. The dimmer controlled modelling light is
powered directly from the mains and it is therefore important
to check that the rated voltage for the lamp corresponds with
the mains supply. A 250 W E11 Mini-can halogen lamp is
included in standard deliveries. The Acute2 head is supplied
with a frosted UV-coated glass cover and a Zoom reflector.
Combined with the UV-reducing quartz flash tube the frost-
ed glass cover offers the recommended colour temperature
for daylight type film. Distinctive colour temperature adjust-
ments can be obtained by combining glass covers with differ-
ent coatings. The following glass covers are available:
10 15 33
10 15 35
10 15 34
10 15 37
10 15 39
10 15 36
10 20 02
10 20 13
Glass Cover, frosted, UV-coated (standard)
Glass Cover, frosted, extra UV-coated, -300°K
Glass Cover, frosted, uncoated
Glass Cover, clear, UV-coated
Glass Cover, clear, extra UV-coated, -600°K
Glass Cover, clear, uncoated
250W, 120V Halogoen, Mini-Can
250W, 240V Halogen, Mini-Can
11